Please register and login in order to share patches.

TensionBass RD by Behringer

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is manually set to 77% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 255.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 4.16dB (229) and is modulated by Note Vel, VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 41.

Oscillators ranges timbre

Oscillators 1 range is 16'.

Oscillators 2 range is 16'.

Noise timbre

Noise level is manually set to 255.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 377.16Hz (86) and is modulated by Mod Wheel, Note Vel, LFO 1, VCF Env, Mod Env, Ctrl Seq.

Note Vel modulates Mod Env (amount: -10), that in turn modulates low-pass filter cut-off frequency.

LFO 1 direct modulation amount for low-pass filter cut-off frequency is 69.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 118.

Mod Env mod-matrix 5 modulation amount for low-pass filter cut-off frequency is -10.

Ctrl Seq mod-matrix 6 modulation amount for low-pass filter cut-off frequency is -74.

Low-pass filter envelope amount is modulated by Note Vel, Note Num, Mod Wheel.

Note Vel direct modulation amount for low-pass filter envelope amount is 182.

Note Num direct modulation amount for low-pass filter envelope amount is 153.

Mod Wheel mod-matrix 1 modulation amount for low-pass filter envelope amount is 97.

Filter resonance is statically set to 19% (48).

Oscillator drift & unison detuning timbre

Unison detune level is set to ±17 cents (87) and is modulated by Note Vel, Mod Env.

Note Vel modulates Mod Env (amount: 54), that in turn modulates unison detune level.

Mod Env mod-matrix 8 modulation amount for unison detune level is 54.

Oscillators drift level is manually set to 8. Drift rate is 64

Performance triggering timbre

Envelope triggering mode is set to re-trigger.

Portamento pitch

Portamento time is manually set to 23.

Arpeggiator pitch

Arpeggiator rate is 120 bpm with a clock divider of 1/16 .

Arpeggiator gate is manually set to 255.

Arpeggiator mode is Down (1) over 2 octaves. Looping gate/velocity pattern is preset pattern 5.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is off. Effect 4 level is off.

Reverse Reverb fx

not yet complete

Chorus fx

not yet complete

Mod Wheel modulator

Controls VCF Env Decay Time Curve, VCF Cut-off Frequency, Reverse Reverb Param 5.

function	type	destination	amount
timbre	matrix	VCF Env Decay Time Curve	97
timbre	fader-indirect	VCF Cut-off Frequency	118
fx	matrix	Reverse Reverb Param 5	127

Note Num modulator

Controls VCF Keyboard Tracking.

function	type	destination	amount
timbre	fader	VCF Keyboard Tracking	153

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity, All Decay Times, VCA Gain for All Voices, Unison Detune.

function	type	destination	amount
timbre	fader-indirect	VCF Cut-off Frequency	118
	menu	VCF Envelope Velocity Sensitivity	182
	menu	VCA Envelope Velocity Sensitivity	60
timbre,volume,pitch	matrix	All Decay Times	39
volume	menu-indirect	VCA Gain for All Voices	255
timbre	indirect	VCF Cut-off Frequency	-10
timbre	indirect	Unison Detune	54

LFO 1 modulator

Controls VCF Cut-off Frequency, LFO 1 Rate.

function	type	destination	amount
timbre	fader	VCF Cut-off Frequency	69
	matrix	LFO 1 Rate	-12

name	value
LFO 1 Rate	0.04Hz (0)
LFO 1 Delay / Fade	3.21s (124)
LFO 1 Shape	Sine
LFO 1 Key Sync	on
LFO 1 Arp Sync	on
LFO 1 Mono Mode	0
LFO 1 Slew Rate	0

LFO 2 modulator

Controls Mod Matrix Routing 4 Depth, Reverse Reverb Param 5.

function	type	destination	amount
	matrix	Mod Matrix Routing 4 Depth	74
fx	cross-mod	Reverse Reverb Param 5	255*202

name	value
LFO 2 Rate	0.64Hz (95)
LFO 2 Delay / Fade	0.8s (31)
LFO 2 Shape	Sine
LFO 2 Key Sync	off
LFO 2 Arp Sync	off
LFO 2 Mono Mode	0
LFO 2 Slew Rate	0

VCA Env modulator

Controls VCA Gain for All Voices.

function	type	destination	amount
volume	menu	VCA Gain for All Voices	255

name	value
VCA Envelope Attack Time	0s (0)
VCA Envelope Decay Time	0.41s (69)
VCA Envelope Sustain Level	0% (0)
VCA Envelope Release Time	0.24s (40)
VCA Envelope Trigger Mode	Key (0)
VCA Envelope Attack Curve	195
VCA Envelope Decay Curve	190
VCA Envelope Sustain Curve	198
VCA Envelope Attack Curve	12

VCF Env modulator

Controls VCF Cut-off Frequency.

function	type	destination	amount
timbre	fader	VCF Cut-off Frequency	118

name	value
VCF Envelope Attack Time	0s (0)
VCF Envelope Decay Time	0.08s (13)
VCF Envelope Sustain Level	4% (10)
VCF Envelope Release Time	0.04s (7)
VCF Envelope Trigger Mode	Key (0)
VCF Envelope Attack Curve	77
VCF Envelope Decay Curve	22
VCF Envelope Sustain Curve	147
VCF Envelope Attack Curve	128

Mod Env modulator

Controls VCF Cut-off Frequency, Unison Detune.

function	type	destination	amount
timbre	matrix	VCF Cut-off Frequency	-10
timbre	matrix	Unison Detune	54

name	value
Mod Envelope Attack Time	0s (0)
Mod Envelope Decay Time	0.75s (102)
Mod Envelope Sustain Level	11% (28)
Mod Envelope Release Time	0.42s (71)
Mod Envelope Trigger Mode	Key (0)
Mod Envelope Attack Curve	67
Mod Envelope Decay Curve	34
Mod Envelope Sustain Curve	188
Mod Envelope Attack Curve	0

Ctrl Seq modulator

Controls VCF Cut-off Frequency.

function	type	destination	amount
timbre	matrix	VCF Cut-off Frequency	-74

name	value
Ctrl Sequencer Enable	on
Ctrl Sequencer Clock Divider	15
Sequence Length	4
Sequencer Swing Timing	0
Key Sync & Loop	2
Slew Rate	242
Seq Step Value 1	121
Seq Step Value 2	131
Seq Step Value 3	126
Seq Step Value 4	135